March
28th
FORT WORTH, TX

AAON Controls Training

TAS Fort Worth

This is a 2-Day class on March 28 & 29 covering the following...

AAON Controls Overview, Prism Software, VCCX2 Configuration, Module Configuration, VCCX2 Setpoints, Communication Devices, etc.

Requirements: Each student is required to bring a laptop to class with prerequisite info downloaded and installed.  Prerequisite information and instructions will be emailed after registration is complete.

Cost: $600 per person

8:00 AM - 5:00 PM
FORT WORTH, TX
March
31st
FORT WORTH, TX

AAON RTU and Split System Startup

TAS Fort Worth

This class covers...

Startup & commissioning, Single Zone VAV Sequence of Operation, Digital Compressors/ How they work / how to trouble shoot, Heating, Control Setup, Correct Refrigerant charging method, Condenser fan setup, Microchannel Coils & their effect on the system operation / charge.

Requirements: Each student is required to bring a laptop to class with prerequisite info downloaded and installed.  Prerequisite information and instructions will be emailed after registration is complete.

Cost: $400 per person

8:00 AM - 5:00 PM
FORT WORTH, TX
April
4th
MISSOURI CITY, TX

AAON Controls Training

TAS Houston

This is a 2-Day class on April 4 & 5 covering the following...

AAON Controls Overview, Prism Software, VCCX2 Configuration, Module Configuration, VCCX2 Setpoints, Communication Devices, etc.

Requirements: Each student is required to bring a laptop to class with Windows 10 or 11 operating systems.

Cost: $600 per person

8:00 AM - 5:00 PM
MISSOURI CITY, TX
April
6th
MISSOURI CITY, TX

AAON RTU and Split System Startup Training

TAS Houston

This class covers...

Startup and commissioning of the refrigerant system, sequences of operation, scroll compressor overview, correct refrigerant charging method, controls overview and identification of various components, how to communicate with controllers, microchannel coils and the effect on the system operation/charge, types of heat and startup, split system piping requirements and limitations, and types of compressors and their effects on refrigerant line selections.

Requirements: Each student is required to bring a laptop to class with prerequisite info downloaded and installed.  Prerequisite information and instructions will be emailed after registration is complete.

Cost: $400 per person

8:00 AM - 5:00 PM
MISSOURI CITY, TX
April
11th
FORT WORTH, TX

JCI SSE Controls Training

TAS Fort Worth

This class covers...

JCI SSE basic component familiarization, control functionality, control board setup, control board display navigation, map gateway navigation, start-up, and commissioning procedures for JCI RTUs, and documentation of start-up.

Cost: $400 per person

8:00 AM - 5:00 PM
FORT WORTH, TX
April
18th
FORT WORTH, TX

ABB ACH580 Familiarization Training

TAS Fort Worth

What you will learn...

This class provides a basic knowledge, functionality, and warranty overview of the ACH580 VFD for a basic Start Up.  Key ACH580 improvements over ACH550 will be covered as well as control wiring, manual and automatic back-up, Bluetooth capability, drive composer software, etc.

Requirements: Each student is required to bring a laptop to class with prerequisite info downloaded and installed.  Prerequisite information and instructions will be emailed after registration is complete.

Cost: $450 per person

8:00 AM - 5:00 PM
FORT WORTH, TX
April
20th
FORT WORTH, TX

LG MLV-01 Installation Training

TAS Fort Worth

What you will learn…

LG manufacturer’s guidelines for installing the piping and wiring systems connected to the indoor and outdoor LG Multi V™ air conditioning equipment.

Cost: $150 per person

8:00 AM - 5:00 PM
FORT WORTH, TX
May
2nd
FORT WORTH, TX

Seresco Training

TAS Fort Worth

What you will learn...

Startup & Commissioning Requirements, Control Board and Command Center Remote Display Wiring, Basic Component Familiarization and Functionality, Compressor Wall Technology, Piping Considerations, and WebSentry and it’s functions.  We will also address air qualities and quantities pertaining to natatoriums and the effects of poor system design/operation.

Cost: $200 per person

8:00 AM - 12:00 PM
FORT WORTH, TX
May
4th
FORT WORTH, TX

JCI SSE Controls Training

TAS Fort Worth

This class covers...

JCI SSE basic component familiarization, control functionality, control board setup, control board display navigation, map gateway navigation, start-up, and commissioning procedures for JCI RTUs, and documentation of start-up.

Cost: $400 per person

8:00 AM - 5:00 PM
FORT WORTH, TX
May
5th
FORT WORTH, TX

ABB ACH580 Familiarization Training

TAS Fort Worth

What you will learn...

This class provides a basic knowledge, functionality, and warranty overview of the ACH580 VFD for a basic Start Up.  Key ACH580 improvements over ACH550 will be covered as well as control wiring, manual and automatic back-up, Bluetooth capability, drive composer software, etc.

Requirements: Each student is required to bring a laptop to class with Windows 10 or 11 operating system.

Cost: $450 per person

8:00 AM - 5:00 PM
FORT WORTH, TX
May
8th
SCHERTZ, TX

ABB ACH580 Familiarization Training

TAS San Antonio

What you will learn...

This class provides a basic knowledge, functionality, and warranty overview of the ACH580 VFD for a basic Start Up.  Key ACH580 improvements over ACH550 will be covered as well as control wiring, manual and automatic back-up, Bluetooth capability, drive composer software, etc.

Requirements: Each student is required to bring a laptop to class with Windows 10 or 11 operating system.

Cost: $450 per person

8:00 AM - 5:00 PM
SCHERTZ, TX
May
9th
FORT WORTH, TX

LG MLV-01 Installation Training

TAS Fort Worth

What you will learn…

LG manufacturer’s guidelines for installing the piping and wiring systems connected to the indoor and outdoor LG Multi V™ air conditioning equipment.

Cost: $150 per person

8:00 AM - 5:00 PM
FORT WORTH, TX
May
10th
SCHERTZ, TX

AAON RTU and Split Systems Startup Training

TAS San Antonio

This class covers...

Startup and commissioning of the refrigerant system, sequences of operation, scroll compressor overview, correct refrigerant charging method, controls overview and identification of various components, how to communicate with controllers, microchannel coils and the effect on the system operation/charge, types of heat and startup, split system piping requirements and limitations, and types of compressors and their effects on refrigerant line selections.

Requirements: Each student is required to bring a laptop to class with Windows 10 or 11 operating system.

Cost: $400 per person

8:00 AM - 5:00 PM
SCHERTZ, TX
May
10th
SCHERTZ, TX

JCI SSE Controls Training

TAS San Antonio

This class covers...

JCI SSE basic component familiarization, control functionality, control board setup, control board display navigation, map gateway navigation, start-up, and commissioning procedures for JCI RTUs, and documentation of start-up.

Cost: $400 per person

8:00 AM - 5:00 PM
SCHERTZ, TX
May
11th
SCHERTZ, TX

AAON Controls Training

TAS San Antonio

This is a 2-Day class on May 11 & 12 covering the following...

AAON Controls Overview, Prism Software, VCCX2 Configuration, Module Configuration, VCCX2 Setpoints, Communication Devices, etc.

Requirements: Each student is required to bring a laptop to class with Windows 10 or 11 operating systems.

Cost: $600 per person

8:00 AM - 5:00 PM
SCHERTZ, TX